Action Url Configuration - Yealink SIP-T2 Series Administrator's Manual

Variable Value
$ehs_number The number of the connected EHS.
$udisk_number The number of the connected USB flash drives.
$usbheadset_
The number of the connected USB headset devices.
number
$wifi_number The number of the connected Wi-Fi dongles.
$bluetooth_num-
The number of the connected Bluetooth dongles.
ber

Action URL Configuration

The following table lists the parameters you can use to configure action URL.
Parameter action_url.setup_completed
It configures the action URL the IP phone sends after startup.
The value format is: http(s)://IP address of server/help.xml?variable name=variable value.
Valid variable values are:
$mac
l
$ip
l
$model
l
$firmware
l
$active_url
l
$active_user
l
$active_host
l
$local
l
$remote
l
Description
$display_local
l
$display_remote
l
$call_id
l
$callerID
l
$calledNumber
l
$exp_number
l
$ehs_number
l
$udisk_number
l
$usbheadset_number
l
$wifi_number
l
$bluetooth_number
l
Example:
action_url.setup_completed = http://192.168.0.20/help.xml?IP=$ip
URL within 511 characters
Permitted
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
Values
events, refer to
Default Blank
Web UI Features->Action URL->Setup Completed
Pre-defined Events List. For variable value, refer to
Description
<y0000000000xx>.cfg
Variable Values
Advanced Features
List.
443