Example: Adding Contacts Using A Contact File - Yealink SIP-T2 Series Administrator's Manual

Default Blank
Parameter local_contact.icon.url
It configures the access URL of a TAR contact icon file.
The format of the contact icon must be *.png, *.jpg, *.bmp.
The contact icon file should be compressed as a TAR file in advance and then place it to the provisioning
server.
Description
Example:
local_contact.icon.url = tftp://192.168.10.25/photo2.tar
Note: It is only applicable to T48G/T48S IP phones.
Permitted
URL within 511 characters
Values
Default Blank

Example: Adding Contacts Using a Contact File

The following example shows the configuration for customizing a local contact file.
Customize the contact file "contact.xml" and place the contact file "contact.xml" and custom contact source (avatars
or icons) to the provisioning server "http://192.168.10.25".
Example
local_contact.photo.url = http://192.168.10.25/Lily_photo.jpg
local_contact.data.url = tftp://192.168.10.25/contact.xml
During auto provisioning, the IP phone connects to the provisioning server "192.168.10.25", and downloads the local
contact file "contact.xml" and an avatar "Lily_photo.jpg". You can view the contacts on their phone, and specify the
avatar "Lily_photo.jpg" for a contact.
On T48S/T48G IP phones, when uploading a contact avatar, you can also upload a contact icon named the same as this
avatar, since a one-to-one correspondence between the icon and avatar. For example, an icon file and avatar file both
named "Lily_photo.jpg" are available on the phone, the contact with specified default_photo="Lily_photo.jpg" will use
the corresponding name "Lily_photo.jpg" as directory icon and avatar display.
The following shows the custom contact Lily with corresponding avatar and icon display:
Note
If you have configured to back up the local contacts to the server, the IP phone will download the contact file "<MAC>-con-
tact.xml" from the backup path from the server and display the downloaded contacts in the local directory list. The contacts
in the local contact file "contact.xml" downloaded from the provisioning server do not take effect.
<y0000000000xx>.cfg
Directory
237