Web Server Type Configuration - Yealink SIP-T2 Series Administrator's Manual

String
Permitted If it is left blank, you are only allowed to use IP address to access the web user interface of the IP phone.
Values
If it is set to "any", you can use IP address or any domain name to access the web user interface of the IP
phone.
Default any

Web Server Type Configuration

Yealink IP phones support both HTTP and HTTPS protocols for accessing the web user interface. You can configure the
web server type. Web server type determines access protocol of the web user interface. If you disable to access web
user interface using the HTTP/HTTPS protocol, both you and the user cannot access the web user interface.
The following table lists the parameters you can use to configure web server type.
Parameter static.wui.http_enable
Description It enables or disables the user to access the web user interface of the IP phone using the HTTP protocol.
Permitted 0-Disabled
Values 1-Enabled
Default 1
Web UI Network->Advanced->Web Server->HTTP
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Status
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web Server->HTTP Status
Parameter static.network.port.http
It configures the HTTP port for the user to access the web user interface of the IP phone using the HTTP
Description
protocol.
Permitted
Integer from 1 to 65535
Values
Default 80
Web UI Network->Advanced->Web Server->HTTP Port (1~65535)
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Port
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web Server->HTTP Port
Parameter static.wui.https_enable
Description It enables or disables the user to access the web user interface of the IP phone using the HTTPS protocol.
Permitted
0-Disabled
1-Enabled
Values
Default 1
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Provisioning
71