Broadsoft Xsi - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
and display results on the pre-dialing/dialing screen.
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter search_in_dialing.bw_uc_buddies.priority
It configures the search priority of the BroadSoft Buddies directory.
Description
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Integer greater than or equal to 0
Values
Default 6
Parameter directory_setting.bw_uc_buddies.enable
It enables or disables the users to access the BroadSoft Buddies directory by pressing the Directory/Dir
soft key.
Description
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter directory_setting.bw_uc_buddies.priority
It configures the display priority of the BroadSoft Buddies directory.
Description
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Integer greater than or equal to 0
Values
Default 12
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.

Broadsoft XSI

Parameter account.X.xsi.user
It configures the user name for XSI authentication.
Example:
Description
account.1.xsi.user = 3502@as.iop1.broadworks.net
Note: It works only if "bw.xsi.enable" is set to 1 (Enabled).
Permitted
String within 99 characters
Values
Default Blank
Web UI Applications->Broadsoft XSI->XSI Account->User ID (if bw.enable =1)
Parameter account.X.xsi.password
Description It configures the password for XSI authentication.
486
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<MAC>.cfg
<MAC>.cfg