Local DTMF Tone Configuration
Local DTMF Tone Configuration
The following table lists the parameter you can use to configure the local DTMF tone.
Parameter features.play_local_dtmf_tone_enable
Description It enables or disables the IP phone to play a local DTMF tone.
0-Disabled
Permitted
Values
1-Enabled, you can hear the DTMF tone when pressing the IP phone's keypad during a call.
Default
1
Web UI
Features->General Information->Play Local DTMF Tone
Voice Quality Monitoring (VQM)
Voice quality monitoring feature allows the IP phones to generate various quality metrics for listening quality and con-
versational quality. These metrics can be sent between the phones in RTCP-XR packets. These metrics can also be sent
in SIP PUBLISH messages to a central voice quality report collector. Yealink IP phones support two mechanisms for
voice quality monitoring: RTCP-XR and VQ-RTCPXR.
Topics
RTCP-XR
VQ-RTCPXR
RTCP-XR
The RTCP-XR mechanism, compliant with
tained in RTCP-XR packets for monitoring the quality of calls. These metrics include network packet loss, delay metrics,
analog metrics and voice quality metrics.
Topic
RTCP-XR Configuration
RTCP-XR Configuration
The following table lists the parameters you can use to configure the RTCP-XR.
Parameter voice.rtcp_xr.enable
Description It enables or disables the IP phone to send RTCP-XR packets.
Permitted
0-Disabled
1-Enabled
Values
Default
0
Web UI
Settings->Voice Monitoring->Voice RTCP-XR Report
Parameter voice.rtcp.enable
Description It enables or disables the IP phone to send RTCP packets.
Permitted
0-Disabled
1-Enabled
Values
RFC 3611-RTP Control Extended Reports (RTCP
[1]
[1]
<y0000000000xx>.cfg
XR), provides the metrics con-
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Audio Features
367