Edk User Input Prompt Configuration - Yealink SIP-T2 Series Administrator's Manual

edk.edklist.2.mname = macro2
Note: If there are two or more same macros, the soft key or DSS key will invoke the macro with the smal-
lest value of X. It works only if "features.enhanced_dss_keys.enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
Parameter edk.edklist.X.action
It configures the action string that contains a macro definition of the action that the softkey or DSS key
performs.
This parameter must have a value, it cannot be left blank.
Description
Example:
edk.edklist.2.action = 1013$Tinvite$
Note: It works only if "features.enhanced_dss_keys.enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
[1]
X is the macro ID. X=1-255.

EDK User Input Prompt Configuration

The EDK user input prompt parameters must be used if interactivity with the user is implemented as part of any macro.
The following table lists the parameters you can use to configure EDK user input prompt.
Parameter edk.edkprompt.X.enable
It enables or disables user input prompt X.
Description
Note: If a macro attempts to use an EDK user input prompt that is disabled, the macro execution fails. It
works only if "features.enhanced_dss_keys.enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default 0
Parameter edk.edkprompt.X.label
It configures the text string used as a label of the user input prompt X.
If it is left blank, Default is displayed.
Example:
Description
edk.edkprompt.1.label = Enter Password
Note: It works only if "features.enhanced_dss_keys.enable" and "edk.edkprompt.X.enable" are set to 1
(Enabled).
Permitted
String
Values
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
179