Yealink SIP-T2 Series Administrator's Manual page 291

Parameter account.X.anonymous_call
Description It triggers the anonymous call feature to on or off.
0-Off
Permitted
1-On, the IP phone will block its identity from showing to the callee when placing a call. The callee's
Values
phone screen presents "Anonymous" instead of the caller's identity.
Default 0
Web UI Account->Basic->Anonymous ("account.X.anonymous_call.server_base_only" must not be left blank)
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Anonymous->Line X->Anonymous ("account.X.anonymous_call.server_base_only"
must not be left blank)
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->Anonymous Call->Anonymous ("account.X.anonymous_call.server_base_only" must
not be left blank)
Parameter account.X.send_anonymous_code
It configures the IP phone to send anonymous on/off code to activate/deactivate the server-side anonym-
Description
ous call feature for a specific account.
0-Off Code, the IP phone will send anonymous off code to the server when you deactivate the anonym-
ous call feature.
Permitted
Values
1-On Code, the IP phone will send anonymous on code to the server when you activate the anonymous
call feature.
Default 0
Web UI Account->Basic->Send Anonymous Code
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Anonymous->LineX->Send Anony Code
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->Anonymous Call->Send Anonymous Code
Parameter account.X.anonymous_call.server_base_only
It enables or disables the IP phone to perform the anonymous call feature on server-side only.
Description
Note: You need to configure parameters "account.X.anonymous_call_oncode" and "accoun-
t.X.anonymous_call_offcode" to activate or deactivate the server-side anonymous call feature.
0-Disabled, the IP phone will perform the anonymous call feature on server-side and locally. If the
anonymous call feature is enabled on the IP phone, the IP phone will carry the Anonymous attribute in
the From header of the INVITE message.
Permitted
Values
1-Enabled, the IP phone will perform the anonymous call feature on server-side only. The IP phone will
not carry the Anonymous attribute in the From header of the INVITE message even if the anonymous call
feature is enabled on the IP phone.
Default Blank
Parameter account.X.anonymous_call_oncode
Description It configures the anonymous call on code.
[1]
<MAC>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg
[1]
<MAC>.cfg
Call Features
285