Dialog Info Call Pickup Configuration - Yealink SIP-T2 Series Administrator's Manual

</remote>
</dialog>
</dialog-info>
Example of the Replaces carried in INVITE message:
Via: SIP/2.0/UDP 10.10.20.18:5060;branch=z9hG4bK2026058891
From: "1010" <sip:1010@10.2.1.48:5060>;tag=826048502
To: <sip:1058@10.2.1.48:5060>
Call-ID: 0_572446084@10.10.20.18
CSeq: 1 INVITE
Contact: <sip:1010@10.10.20.18:5060>
Content-Type: application/sdp
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH, UPDATE,
MESSAGE
Max-Forwards: 70
User-Agent: Yealink SIP-T46G 28.82.0.20
Replaces: 0_1756536024@10.10.20.34;to-tag=3779921438;from-tag=3408640225
Allow-Events: talk,hold,conference,refer,check-sync
Supported: replaces
Content-Length: 304
Related Topics

Dialog Info Call Pickup Configuration

Busy Lamp Field
Dialog Info Call Pickup Configuration
The following table lists the parameter you can use to configure dialog Info call pickup.
Parameter account.X.dialoginfo_callpickup
It enables or disables the IP phone implements directed call pickup through SIP signals for a specific
account.
Description
Note: It is not applicable to T19(P) E2/CP920 IP phones. In this way, you do not need to configure the dir-
ected call pickup code.
0-Disabled
Permitted
Values
1-Enabled, the IP phone picks up a call according to the Replaces header in INVITE message.
Default 0
Web UI Account->Advanced->Dialog Info Call Pickup
[1]
<MAC>.cfg
Advanced Features
401