Display Method On Dialing; Display Method On Dialing Configuration; Key As Send; Key As Send Configuration - Yealink SIP-T2 Series Administrator's Manual

[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
[2]
If you change this parameter, the IP phone will reboot to make the change take effect.

Display Method on Dialing

When the IP phone is on the pre-dialing or dialing screen, the account information will be displayed on the LCD
screen.
Yealink IP phones support three display methods: Label, Display Name and User Name. You can customize the account
information to be displayed on the IP phone as required.
Topic

Display Method on Dialing Configuration

Display Method on Dialing Configuration
The following table lists the parameters you can use to configure display method on dialing.
Parameter features.caller_name_type_on_dialing
It configures the selected line information displayed on the pre-dialing or dialing screen.
Description
Note: It works only if "features.station_name.value" is left blank.
1-Label, configured by the parameter "account.X.label".
Permitted
2-Display Name, configured by the parameter "account.X.display_name".
Values
3-User Name, configured by the parameter "account.X.user_name".
Default 3
Web UI Features->General Information->Display Method on Dialing

Key As Send

Key as send allows you to assign the pound key ("#") or asterisk key ("*") as the send key.
Topic

Key As Send Configuration

Key As Send Configuration
The following table lists the parameters you can use to configure key as send.
<y0000000000xx>.cfg
Phone Customization
137