Yealink SIP-T2 Series Administrator's Manual page 464

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Variable Value
ONHOOK
ANSWER/ASW/Asw
Reset
ATrans=xxx
BTrans=xxx
phonecfg=get[&accounts=x][&dnd=x][&fw=x]
CallWaitingOn
CallWaitingOff
AlwaysFwdOn/BusyFwdOn/NoAnswFwdOn=xxx=n
AlwaysFwdOff/BusyFwdOff/NoAnswFwdOff
458
Hang up the handset (not applicable to CP920 IP phones).
Press the on-hook key. (only applicable to CP920 IP phones)
Answer a call.
Reset a phone.
Perform a semi-attended/attended transfer to xxx.
Perform a blind transfer to xxx.
Get firmware version, registration, DND or forward configuration
information.
The valid value of "x" is 0 or 1, 0 means you do not need to get
configuration information. 1 means you want to get con-
figuration information.
Note: The valid URI is: http(s)://<-
phoneIPAddress>/servlet?phonecfg=get[&accounts=x]
[&dnd=x][&fw=x]
Example:
http://10.3.20.10/servlet?phonecfg=get[&accounts=1][&dnd=0]
[&fw=1]
Activate the call waiting feature.
Deactivate the call waiting feature.
Activate an always/busy/no answer forward feature to xxx for the
IP phone ("xxx" means the destination number)
The valid value of "n" means the duration time (seconds) before
forwarding incoming calls (n is the times of 6, for example, 24). It
is only applicable to no answer forward feature.
Note: For Yealink IP phones, it works only if "features.fwd.allow"
is set to 1 (Enabled) and call forward mode is Phone, the
always/busy/no answer forward feature will apply to all the
accounts on the phone.
Example:
http://10.10.20.10/servlet?key=NoAnswFwdOn=1001=24
Deactivate the always/busy/no answer forward feature for the IP
phone.
Note: For Yealink IP phones, it works only if "features.fwd.allow"
is set to 1 (Enabled) and call forward mode is Phone, the
always/busy/no answer forward feature will apply to all the
accounts on the phone.
Example:
http://10.10.20.10/servlet?key=NoAnswFwdOff
Phone Action