Yealink SIP-T2 Series Administrator's Manual page 508

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Values
Default Personal
Web UI Applications->Broadsoft XSI->Network Directory->Personal (if bw.enable =1)
Parameter directory.update_time_interval
It configures the interval (in minutes) for the IP phone to update the data of the BroadSoft directory from
the BroadSoft server.
Description
Note: It works only if "bw.xsi.directory.enable" and "bw.xsi.directory.update.enable" are set to 1
(Enabled).
Permitted
Integer from 60 to 34560
Values
Default 60
Parameter bw.xsi.directory.update.enable
It enables or disables the IP phone to automatically download all contacts in the BroadSoft Directory from
the server.
Description
Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).
0-Disabled, the IP phone downloads partial contacts from the server (the maximum of contacts available
for viewing at one time is determined by the server), and you can manually download the remaining con-
Permitted
tacts as needed.
Values
1-Enabled
Default 1
Parameter bw_phonebook.group_common_displayname
It configures the display name on the phone screen for the group common directory.
Description
Note: It works only if "bw.xsi.enable", "bw.xsi.directory.enable" and "bw_phonebook.group_common_
enable" are set to 1 (Enabled).
Permitted
String within 99 characters
Values
Default GroupCommon
Web UI Applications->Broadsoft XSI->Network Directory->Group Common (if bw.enable =1)
Parameter bw.xsi.directory.alphabetized_by_lastname.enable
It configures the call ID (first name and last name) display method when the phone receives an incoming
call, places an outgoing call or is during an active call.
Description
Note: It is not applicable to CP920 IP phones.
0-First name Last name
Permitted
Values
1-Last name, First name
Default 0
Parameter bw.calllog_and_dir
It enables or disables the IP phone to directly enter the Network Calls screen when pressing the History
soft key on the idle screen.
Description
Note: It works only if "bw.xsi.enable" and "bw.xsi.call_log.enable" are set to 1 (Enabled).
502
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg