Yealink SIP-T2 Series Administrator's Manual page 29

Default 0
Web UI Network->Basic->IPv4 Config
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv4
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin)->Network->WAN Port->IPv4
Parameter static.network.internet_port.ip
It configures the IPv4 address.
Example:
Description
static.network.internet_port.ip = 192.168.1.20
Note: It works only if "static.network.ip_address_mode" is set to 0 (IPv4) or 2 (IPv4 & IPv6), and "stat-
ic.network.internet_port.type" is set to 2 (Static IP Address).
Permitted
IPv4 Address
Values
Default Blank
Web UI Network->Basic->IPv4 Config->Static IP Address->IP Address
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv4->Static IP->IP Address
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin)->Network->WAN Port->IPv4->Static
IPv4 Client->IP Address
Parameter static.network.internet_port.mask
It configures the IPv4 subnet mask.
Example:
Description
static.network.internet_port.mask = 255.255.255.0
Note: It works only if "static.network.ip_address_mode" is set to 0 (IPv4) or 2 (IPv4 & IPv6), and "stat-
ic.network.internet_port.type" is set to 2 (Static IP Address).
Permitted
Subnet Mask
Values
Default Blank
Web UI Network->Basic->IPv4 Config->Static IP Address->Subnet Mask
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Network->WAN Port->IPv4->Static IP->Subnet Mask
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin)->Network->WAN Port->IPv4->Static
IPv4 Client->Subnet Mask
Parameter static.network.internet_port.gateway
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
Phone Network
23