Yealink SIP-T2 Series Administrator's Manual page 43

Values
Default 1
Web UI Network->Advanced->VLAN->PC Port->VID (1-4094)
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->PC Port->VID Number
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->VLAN->PC Port->VID Num-
ber
Parameter static.network.vlan.pc_port_priority
It configures the VLAN priority for the PC port.
7 is the highest priority, 0 is the lowest priority.
Description
Note: It works only if "static.network.pc_port.enable" is set to 1 (Auto Negotiation) and "stat-
ic.network.vlan.pc_port_enable" is set to 1 (Enabled). It is not applicable to CP920 IP phones.
Permitted
Integer from 0 to 7
Values
Default 0
Web UI Network->Advanced->VLAN->PC Port->Priority
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->PC Port->Priority
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->VLAN->PC Port->Priority
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
DHCP VLAN
Yealink IP phones support VLAN discovery via DHCP. When the VLAN discovery method is set to DHCP, the IP phone
will examine DHCP option for a valid VLAN ID. The predefined option 132 is used to supply the VLAN ID by default. You
can customize the DHCP option used to request the VLAN ID.
The following table lists the parameters you can use to configure DHCP VLAN discovery.
static.network.vlan.dhcp_enable
Parameter
Description It enables or disables the DHCP VLAN discovery feature on the IP phone.
Permitted Val- 0-Disabled
ues 1-Enabled
Default 1
Web UI Network->Advanced->VLAN->DHCP VLAN->Active
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Phone UI Menu->Advanced (default password: admin) ->Network->VLAN->DHCP VLAN->DHCP VLAN
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
[1]
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
Phone Network
37