Example: Setting A Custom Logo Display; Call Display - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Parameter lcd_logo.url
It configures the access URL of the custom logo file.
Description
Note: It works only if "phone_setting.lcd_logo.mode" is set to 2 (Custom Logo). It is not applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
URL within 511 characters
Values
Default Blank
Web UI Features->General Information->Upload Logo
Parameter lcd_logo.delete
It deletes all custom logo files.
Description
Note: It is not applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
http://localhost/all
Values
Default Blank

Example: Setting a Custom Logo Display

The following example shows the configuration for uploading a custom logo picture "logo.dob", and then setting it to
display on the phone idle screen. The logo picture is customized and placed on the provisioning server "192.168.10.25".
Example
lcd_logo.url =http://192.168.10.25/logo.dob
phone_setting.lcd_logo.mode =2
After provisioning, the phone displays the custom logo screen and the idle screen alternately.

Call Display

By default, the IP phones present the contact information (including avatar and identity) when receiving an incoming
call, dialing an outgoing call or engaging in a call.
You can configure what contact information presents and how to display the contact information. If the contact exists
in the phone directory, the phone displays the saved contact name and number. If not, it will use Calling Line Iden-
tification Presentation (CLIP) or Connected Line Identification Presentation (COLP) to display the contact's identity.
Topic
Call Display Configuration
134
<y0000000000xx>.cfg
<y0000000000xx>.cfg