Call Park And Retrieve; Call Park And Retrieve Configuration - Yealink SIP-T2 Series Administrator's Manual

Example
features.call_completion_enable = 1
After provisioning, when you place a call and the callee is temporarily unavailable to answer the call, the phone screen
will prompt whether to wait for the callee party. You can activate the call completion feature. After the called party
becomes idle, the phone screen will prompt whether to dial the number.

Call Park and Retrieve

Call park allows users to park a call on a special extension and then retrieve it from another phone (for example, a
phone in another office or conference room).
The IP phones support call park feature under the following modes:
FAC mode: parks the call to the local extension or a desired extension through dialing the park code.
l
Transfer mode: parks the call to the shared parking lot through performing a blind transfer. For some servers, the
l
system will return a specific call park retrieve number (park retrieve code) from which the call can be retrieved after
parking successfully.
Topics

Call Park and Retrieve Configuration

Example: Setting Call Park and Retrieve in FAC Mode
Example: Setting Call Park and Retrieve in Transfer Mode
Call Park and Retrieve Configuration
The following table lists the parameters you can use to configure call park and retrieve.
Parameter features.call_park.park_mode
Description It configures the call park mode.
1-FAC, park a call through dialing the call park code.
Permitted
Values
2-Transfer, blind transfer the call to a shared parking lot.
Default 2
Web UI Features->Pick up & Park->Call Park Mode
Parameter features.call_park.enable
Description It enables or disables the user to use Park and Retrieve soft keys when performing call park feature.
0-Disabled
Permitted
1-Enabled, the phone will display the Park soft key during a call, and display the Retrieve soft key on the
Values
Dialing screen.
Default 0
Web UI Features->Pick up & Park->Call Park
Parameter features.call_park.park_code
It configures the call park code for FAC call park mode, or configures shared parking lot for Transfer call
Description
park mode.
Permitted
String within 32 characters
Values
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Advanced Features
405