Guidelines For Configuring Enhanced Dss Keys; Macro Action Strings - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

Macro Action Strings

EDK Configuration
EDK List Configuration
EDK User Input Prompt Configuration
EDK Soft Keys Configuration
Example: Configuring EDK List for a Line Key
Example: Using EDK Macro Strings as the Contact Number

Guidelines for Configuring Enhanced DSS Keys

The following guidelines will help you to configure EDK efficiently:
Activation of EDK functions requires valid macro construction.
l
Character "$" delimits the parts of the macro string (except the digits only) and it must exist in pairs. For more
l
information, refer to Macro Action
Macros can be invoked in the format "!<macro name>", where <macro name> is defined by the parameter "edk.edk-
l
list.X.mname".
If there are two or more same macros, the soft key or DSS key will invoke the macro with the smallest value of X
l
defined by the parameter "edk.edklist.X.mname".
Macro Action Strings
Before using EDK, you must be familiar with macro language shown in this section.
The following table shows the basic macro action string syntax when creating EDK macros:
Macro Action
Digits
$C<command>$
$T<type>$
$M<macro>$
174
Strings.
The digits to be sent. You can use only *, #, +, 0-9. The appearance of this para-
meter depends on the action string.
Example: *981135.
This is the command. It can appear anywhere in the action string. Supported com-
mands (or shortcuts) include:
hang up (hu)
l
hold (h)
l
waitconnect (wc)
l
pause <number of seconds> (p <num sec>) where the maximum value is 10
l
Example: 4411$Cwc$$Cp10$ defines dialing 4411>>waitconnect>>connected
and lasts 10 seconds.
The embedded action type. Multiple actions can be defined. Supported action
types include:
invite
l
dtmf
l
refer
l
intercom
l
Example: *338$Tdtmf$ defines sending the *338 by the type of dtmf.
Note: We recommend that you always define this field. If not, the supplied digits
are dialed using INVITE.
The embedded macro. The <macro> string must begin with a letter. If the macro
name is not defined, the execution of the action string will be ignored.
Description