Distinctive Ring Tones Configuration - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
If the auto answer tone feature is enabled, the phone plays a warning tone to alert you before answering the incoming
call.
Related Topic
Auto Answer

Distinctive Ring Tones Configuration

The following table lists the parameters you can use to configure distinctive ring tones.
Parameter account.X.alert_info_url_enable
It enables or disables the IP phone to download the ring tone from the URL contained in the Alert-Info
Description
header.
Permitted
0-Disabled
1-Enabled
Values
Default 1
Web UI Account->Advanced->Distinctive Ring Tones
Parameter features.alert_info_tone
It enables and disables the IP phone to map the keywords in the Alert-Info header to the specified
Description
Bellcore ring tones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter distinctive_ring_tones.alert_info.X.text
It configures the internal ringer text to map the keywords contained in the Alert-Info header.
Description Example:
distinctive_ring_tones.alert_info.1.text = Family
Permitted
String within 32 characters
Values
Default Blank
Web UI Settings->Ring->Internal Ringer Text
Parameter distinctive_ring_tones.alert_info.X.ringer
Description It configures the desired ring tone for each internal ringer text.
Integer from 1 to 10 (the digit stands for the appropriate ring tone) or ring tone name:
l
1 or Ring1.wav
2 or Ring2.wav
3 or Ring3.wav
Permitted
4 or Ring4.wav
Values
5 or Ring5.wav
6 or Ring6.wav
7 or Ring7.wav
8 or Ring8.wav
9 or Silent.wav
340
[1]
<MAC>.cfg
<y0000000000xx>.cfg
[2]
<y0000000000xx>.cfg
[2]
<y0000000000xx>.cfg