Call Forward Synchronization For Server-Side Configuration - Yealink SIP-T2 Series Administrator's Manual

Default Blank
Web UI Features->Forward&DND->Forward->AccountX->No Answer Forward->On Code
Phone UI Menu->Features->Call Forward->AccountX->No Answer Forward->On Code
Parameter account.X.timeout_fwd.off_code
It configures the no answer forward off code to deactivate the server-side no answer forward feature.
The IP phone will send the no answer forward off code to the server when you deactivate no answer for-
Description ward feature on the IP phone.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 1 (Cus-
tom). It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
String within 32 characters
Values
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->No Answer Forward->Off Code
Phone UI Menu->Features->Call Forward->AccountX->No Answer Forward->Off Code
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2.

Call Forward Synchronization for Server-side Configuration

Call forward synchronization feature provides the capability to synchronize the status of the call forward features
between the IP phone and the server.
If the call forward is activated in phone mode, the forward status changing locally will be synchronized to all registered
accounts on the server; but if the forward status of the specific account is changed on the server, the forward status
locally will be changed.
The following table lists the parameters you can use to configure call forward synchronization for server-side.
Parameter features.feature_key_sync.enable
Description It enables or disables to synchronize the feature status between the IP phone and the server.
0-Disabled
Permitted
Values
1-Enabled, the IP phone send a SUBSCRIBE message with event "as-feature-event" to the server.
Default 0
Parameter account.X.feature_key_sync.enable
It enables or disables to synchronize the feature status between the IP phone and the server for account
X.
Description
Note: It is not applicable to T48G/T46G/T42G/T41P/T29G/CP920 IP phones. The value configured by this
parameter takes precedence over that configured by the parameter "features.feature_key_sync.enable".
0-Disabled
Permitted
Values
1-Enabled, the IP phone to send a SUBSCRIBE message with event "as-feature-event" to the server.
Default Blank
[1]
<MAC>.cfg
<y0000000000xx>.cfg
[1]
<y0000000000xx>.cfg
Call Features
317