Softkey Layout Configuration - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones

Softkey Layout Configuration

The following table lists the parameters you can use to configure the softkey layout.
Parameter phone_setting.custom_softkey_enable
Description It enables or disables the custom soft keys layout feature.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Web UI Settings->Softkey Layout->Custom SoftKey
Parameter phone_setting.custom_softkey.apply_to_states
It configures the desired call state to apply the custom softkey layout.
To configure the call states to apply the custom softkey layout:
Example:
phone_setting.custom_softkey.apply_to_states = DialingEmpty,DialTransEmpty
It means that DialingEmpty and DialTransEmpty call states will use the custom softkey layout.
Description
To configure the call states not to apply the custom softkey layout:
Example:
phone_setting.custom_softkey.apply_to_states = -DialingEmpty,DialTransEmpty
It means that DialingEmpty and DialTransEmpty call states will not use the custom softkey layout.
Note: Multiple call states are separated by commas. It works only if "phone_setting.custom_softkey_
enable" is set to 1 (Enabled).
Blank (all call states will use the custom softkey layout)
Permitted
Dialing, DialingEmpty, DialTrans, DialTransEmpty, DialConference, DialConferenceEmpty, Talk, Hold, Held,
Values
CallIn, NewCallIn, BeTransferred, SemiAttendTrans, Conferenced, ConferencedHold, Con-
ferencedNewCallIn, Connecting, CallFailed, Paging, ListeningPaging, RingBack, SemiAttendTransBack
Default Blank
Parameter features.custom_softkey_dynamic.enable
It enables or disables the IP phone to display the soft keys relevant to the features (call center, centralized
call recording and executive-assistant).
Description
Note: It works only if "phone_setting.custom_softkey_enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled, the functional soft keys display on the phone screen if the corresponding feature is available.
Default 1
Parameter custom_softkey_call_failed.url
It configures the access URL of the custom file for the soft key presented on the phone screen in the
CallFailed state.
Description
Example:
144
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg