Viewing Configurations Configured Via Different Provisioning Methods; Setting Up A Provisioning Server - Yealink SIP-T2 Series Administrator's Manual

Viewing Configurations Configured via Different Provisioning Methods

On the web user interface, you can click
able to T48S/T46S/T42S/T41S/T27G/CP920 IP phones.
From the detailed information, you can do the following:
Check whether settings you make using a higher priority provisioning method override settings made using a lower
l
priority provisioning method.
Reset a configuration to factory setting.
l
See the default value of the desired configuration.
l
The table lists each parameter in the detailed information.
Parameter
Description
CFG Configuration
Valid Value
Configuration Source Values (This
appears only when the parameter "stat-
ic.auto_provision.custom.protect" is
set to 1.)

Setting Up a Provisioning Server

You can use a provisioning server to configure your IP phones. A provisioning server allows for flexibility in upgrading,
maintaining and configuring the phone. Boot files, configuration files and resource files are normally located on this
server.
Topics
Supported Provisioning Protocols
Supported Provisioning Server Discovery Methods
Configuring a Provisioning Server
after each configuration to see its detailed information. It is only applic-
Description of this configuration item
The parameter in the configuration file
The permitted values
Not Applicable: the value is not changed via phone or
web user interface.
Web/Local:
(It appears only for a
Specific value: the value is changed via phone or web
non-static parameter.)
user interface. Click Reset to reset the value.
Not Applicable: the parameter is not changed in the
Config:
configuration files.
(It appears only for a
Specific value: the parameter is changed in the con-
non-static parameter.)
figuration files. Click Reset to reset the value.
Not Applicable: the parameter is not configured in
Static:
any provisioning method.
(It appears only for a
Specific value: the value is configured in any pro-
static parameter)
visioning method. Click Reset to reset the value.
Default: Default value
Phone Provisioning
Description
81