Auto Answer; Auto Answer Configuration - Yealink SIP-T2 Series Administrator's Manual

Hide thumbs Also See for SIP-T2 Series:
Table of Contents

Advertisement

Default
1

Auto Answer

Yealink IP phones support answering a SIP call or an IP address call automatically. Auto answer is configurable on a
per-line basis, while IP address call is not.
By default, the IP phones will not automatically answer the incoming call during a call or while dialing even if auto
answer is enabled; and the incoming call will not be automatically answered after you end the current call or cancel the
dialing. You can configure how the phone answers the call automatically.
Topic

Auto Answer Configuration

Auto Answer Configuration
The following table lists the parameters you can use to configure auto answer.
Parameter account.X.auto_answer
It enables or disables auto answer a SIP call.
Description
Note: The IP phone cannot automatically answer the incoming call during a call or while dialing even if
auto answer is enabled.
0-Disabled
Permitted
Values
1-Enabled, the IP phone can automatically answer an incoming call.
Default
0
Web UI
Account->Basic->Auto Answer
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Auto Answer->Line X->Auto Answer
Phone UI
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->Auto Answer->Status
account.X.auto_answer_mute_enable
Parameter
(X is equal to 1)
It enables or disables the auto answer mute feature.
Note: It is only applicable to CP920 IP phones. It works only if the values of parameters "account.X.auto_
Description
answer" and "features.allow_mute" are set to 1 (Enabled). The value configured by this parameter takes
precedence over that configured by the parameter "features.mute.autoanswer_mute.enable".
0-Disabled
Permitted
1-Enabled, the IP phone will mute the microphone when an incoming call is automatically answered, and
Values
then the other party cannot hear you.
Default
0
Web UI
Account->Basic->Auto Answer Mute
Phone UI
Settings->Features->Auto Answer->Account 1-> Auto Answer (On) ->Auto Answer Mute
[1]
<MAC>.cfg
<MAC>.cfg
Call Features
289

Advertisement

Table of Contents
loading

Table of Contents