Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Example:
features.dnd.on_code = *71
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and the value of the parameter "fea-
tures.dnd_mode" is set to 0 (Phone) (except T19(P) E2/CP920 IP phones).
Permitted
String within 32 characters
Values
Default
Blank
Web UI
Features->Forward&DND->DND->On Code
Phone UI
Menu->Features->DND->On Code
Parameter features.dnd.off_code
It configures the DND off code to deactivate the server-side DND feature. The IP phone will send the DND
off code to the server when you deactivate DND feature on the IP phone.
Example:
Description
features.dnd.off_code = *72
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and the value of the parameter "fea-
tures.dnd_mode" is set to 0 (Phone) (except T19(P) E2/CP920 IP phones).
Permitted
String within 32 characters
Values
Default
Blank
Web UI
Features->Forward&DND->DND->Off Code
Phone UI
Menu->Features->DND->Off Code
DND in Custom Mode Configuration
The following table lists the parameters you can use to configure DND in Custom mode.
Parameter account.X.dnd.enable
It triggers the DND feature to on or off.
Description
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and value of the parameter "features.dnd_
mode" is set to 1 (Custom). It is not applicable to T19(P) E2/CP920 IP phones.
0-Off
Permitted
Values
1-On, the IP phone will reject incoming calls on account X.
Default
0
Web UI
Features->Forward& DND->DND->AccountX->DND Status
Phone UI
Menu->Features->DND->AccountX->DND Status
Parameter account.X.dnd.on_code
It configures the DND on code to activate the server-side DND feature.
Description
The IP phone will send the DND on code to the server when you activate DND feature on the IP phone.
Example:
298
[1]
[1]
<y0000000000xx>.cfg
<MAC>.cfg
<MAC>.cfg