Yealink SIP-T2 Series Administrator's Manual page 96

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
For example, 001565b09d886.boot and y000000000000.boot.
2. Create per-phone configuration files or common configuration files, and edit the feature parameters in the file you
want to apply to the phones. For example,
Custom configuration file:
CustomSettings.cfg
Custom configuration file:
Linekey.cfg
MAC-Oriented configuration files:
001565b09d886.cfg
3. Place the configuration files to the home directory of the provisioning server. For example, D:\TFTP Provision.
4. Specify the configuration files paths in the boot file as desired. For example,
y000000000000.boot
001565b09d886.boot
5. Place the boot files to the home directory of the provisioning server. For example, D:\TFTP Provision.
6. Reboot IP phones to trigger auto provisioning.
For the phone with MAC 001565b09d886, it will download the 001565b09d886.boot file, and then download Linekey.cfg
and 001565b09d886.cfg files referenced in the 001565b09d886.boot file in sequence from the provisioning server.
For the IP phones except for MAC-specific phone, they will request to download the y000000000000.boot file, and then
request to download the referenced files. The phone-specific configuration file Linekey.cfg only applies to T46S and
T48S IP phones. The only difference is that T46S and T48S IP phones will download both the two files, since the exclude
mode is disabled by default. The other IP phones will only download the CustomSettings.cfg file.
90
phone_setting.contrast = 7
local_time.time_format = 1
lang.gui = Chinese_S
[T42S,T41S]voice_mail.number.1 = *5
[T27G]account.1.dnd.enable = 1
[T41S]account.1.dnd.enable = 0
[T42S]features.dnd.enable = 0
linekey.2.type=13
linekey.2.line=1
linekey.2.value = 4603
linekey.2.label=Bill
account.1.enable = 1
account.1.label = Bill
account.1.display_name = 1023
account.1.auth_name = 1023
account.1.user_name = 1023
account.1.password = 1023
account.1.sip_server.1.address = 10.2.1.199
account.1.sip_server.1.port = 5060
include:config<tftp:/10.2.5.193/CustomSettings.cfg>
[T46S,T48S]include:config "tftp:/10.2.5.193/Linekey.cfg"
include:config<tftp:/10.2.5.193/Linekey.cfg>
include:config<tftp:/10.2.5.193/001565b09d886.cfg>