Action Uri Configuration - Yealink SIP-T2 Series Administrator's Manual

Variable Value
CALLEND/CallEnd
ASW/CANCEL/HOLD/UNHOLD:xxx
[1]
X is the line key ID. For T48G/T48S, X=1-29; For T54S/T46G/T46S/T29G, X=1-27; for T52S/T27G, X=1-21; for
T42G/T42S/T41P/T41S, X=1-15; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2.

Action URI Configuration

The following table lists the parameters you can use to configure action URI.
Parameter features.action_uri.enable
Description It enables or disables the IP phone to receive the action URI requests.
Permitted
0-Disabled
1-Enabled
Values
Default 1
Parameter features.show_action_uri_option
It enables or disables the phone to pop up the Allow Remote Control prompt.
Description
Note: It works only if "features.action_uri.enable" is set to 1 (Enabled).
0-Disabled, the phone will not pop up the Allow Remote Control prompt when receiving an HTTP or
Permitted
HTTPS GET request, or receiving a SIP NOTIFY message with the "Event: ACTION-URI" header. The phone
Values
will directly perform the specified action.
1-Enabled
Default 1
Parameter features.action_uri_limit_ip
It configures the IP address of the server from which the IP phone receives the action URI requests.
Multiple IP addresses are separated by commas.
For discontinuous IP addresses, multiple IP addresses are separated by commas.
For continuous IP addresses, the format likes *.*.*.* and the "*" stands for the values 0~255.
Description For example:
10.10.*.* stands for the IP addresses that range from 10.10.0.0 to 10.10.255.255.
Example:
features.action_uri_limit_ip = any
Note: It works only if "features.action_uri.enable" is set to 1 (Enabled).
Permitted IP address or any
Phone Action
End a call.
Answer/end/hold/unhold a call (xxx refers to the call-id of the
active call).
Example:
http://10.10.20.10/servlet?key=ASW:33093
Note: To get the call-id of the active call, configure the action
URL: http(s)://<phoneIPAddress>/help.xml?CallId=$call_id. For
more information, refer to Action
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Advanced Features
URL.
459