Auto Logout Time; Auto Logout Time Configuration; Phone Lock - Yealink SIP-T2 Series Administrator's Manual

Default Blank
static.security.default_access_level
Parameter
It configures the default access level to access the phone user interface.
Description
Note: It works only if "static.security.var_enable" is set to 1 (Enabled).
0-user
Permitted Values 1-var
2-admin
Default 0
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.

Auto Logout Time

Auto logout time defines how long to log out the web user interface automatically when you do not perform any
actions on web user interface. Once logging out, you must re-enter username and password for web access authen-
tication.
Topic

Auto Logout Time Configuration

Auto Logout Time Configuration
The following table lists the parameter you can use to configure the auto logout time.
Parameter features.relog_offtime
It configures the timeout interval (in minutes) for web access authentication.
Example:
Description
features.relog_offtime = 5
If you log into the web user interface and leave it idle for 5 minutes, it will automatically log out.
Permitted
Integer from 1 to 1000
Values
Default 5
Web UI Features->General Information->Auto Logout Time(1~1000min)

Phone Lock

You can lock the IP phone to prevent it from unauthorized use. Once the IP phone is locked, anyone must enter the
password to unlock it.
Yealink IP phones offer three types for phone lock:
Lock the Menu soft key: it prevents unauthorized users from accessing the menu, changing the personal settings
l
for your phone.
Lock the Function keys: it only allows unauthorized users to use the keypad for placing a call, answering or reject-
l
ing an incoming call and ending a call.
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Security Features
377