Yealink SIP-T2 Series Administrator's Manual page 189

Default 0
Parameter softkey.X.use.connecting
It enables or disables the custom soft key X to be displayed in the connecting state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter softkey.X.use.transfer_connecting
It enables or disables the custom soft key X to be displayed in the transfer connecting state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter softkey.X.use.on_talk
It enables or disables the custom soft key X to be displayed in the talking state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter softkey.X.use.call_failed
It enables or disables the custom soft key X to be displayed in the call failed state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter softkey.X.use.ring_back
It enables or disables the custom soft key X to be displayed in the ring back state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted 0-Disabled
Values 1-Enabled
Default 0
Parameter softkey.X.use.transfer_ring_back
It enables or disables the custom soft key X to be displayed in the transfer ring back state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1 (Enabled).
Permitted 0-Disabled
Values 1-Enabled
Default 0
Parameter softkey.X.use.hold
[1]
[1]
[1]
[1]
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
183