Yealink SIP-T2 Series Administrator's Manual page 229

From the idle screen, you can press the left or right navigation key to select the desired account as the default account
for all IP phones. You can also do the following to configure the default account.
The following table lists the parameters you can use to configure the default account.
Parameter static.features.default_account
It configures the default account.
1-Account 1
2-Account 2
3-Account 3
...
16-Account 16
Description
For T54S/T48S/T48G/T46S/T46G/T29G, accounts 1-16.
For T52S/T42G/T42S, accounts 1-12.
For T41P/T41S/T27G, accounts 1-6.
For T40P/T40G/T23P/T23G, accounts 1-3.
For T21(P) E2, accounts 1-2.
Note: It is not applicable to T19(P) E2 IP phones.
Permitted
Integer from 1 to 16
Values
Default 1
Parameter features.show_default_account
It enables or disables the IP phone to display the label of the default account in the left of the status bar
on the idle screen.
Description
Note: For T42G/T42S/T41P/T41S/T27G IP phones, the label of the default account is displayed in the
middle bottom of the idle screen. It works only if "features.station_name.value" is left blank.
Permitted 0-Disabled
Values 1-Enabled
Default 1
Parameter features.linekey_call_with_default_account
It enables or disables the IP phone to switch the default account when pressing the line key to dial.
For example, the account on line 2 is not the default account, if this feature is enabled, when pressing the
Description
line key 2 to dial, the default account will switch to the account on line 2.
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
0-Disabled
1-Enabled
Values
Default 0
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Account Settings
223