Blf Led Mode Configuration; Blf/Blf List Key Led Status And Behavior Configuration - Yealink SIP-T2 Series Administrator's Manual

LED Status
Slow-flashing red (1s)
Off
Line Key/Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF LED Mode is set to 4. This
mode is specifically designed for the Genband server.)
LED Status
Solid green The monitored user is talking.
Slow-flashing green (1s) The monitored user does not exist.
Off The monitored user is idle.

BLF LED Mode Configuration

The following table lists the parameters you can use to configure BLF LED Mode.
Parameter features.blf_led_mode
It configures BLF LED mode and provides five kinds of definition for the BLF/BLF List DSS key LED status.
Description
Note: It is not applicable to T19(P) E2/CP920 IP phones. For the Genband server, you can set the value of
this parameter to 4.
Permitted
0,1,2,3,4
Values
Default 0
Web UI Features->General Information->BLF LED Mode

BLF/BLF List Key LED Status and Behavior Configuration

You can customize the BLF LED status (or the color of BLF icon for T48S/T48G IP phones) and BLF/BLF List key behavior
using the EDK macros if required.
This feature depends on support from a SIP server.
Note
For more information on EDK macros, refer to
Topics
Supported BLF/BLF List Key Behaviors
BLF Key LED/Icon and Behavior for Idle State Configuration
BLF Key LED/Icon and Behavior for Call-in State Configuration
BLF Key LED/Icon and Behavior for Call-out State Configuration
BLF Key LED/Icon and Behavior for Talking State Configuration
BLF Key LED/Icon and Behavior for Parked-Against State Configuration
The monitored user is talking.
The monitored user's conversation is placed on hold (This LED status requires server sup-
port).
The call is parked against the monitored user's phone number.
The monitored user is idle.
The monitored user does not exist.
Description
Macro Action Strings
Description
<y0000000000xx>.cfg
.
Advanced Features
421