Call Number Filter; Call Number Filter Configuration - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
The IP phone will send the code to activate anonymous call feature on server-side when you activate it on
the IP phone.
Example:
account.1.anonymous_call_oncode = *72
Permitted
String within 32 characters
Values
Default Blank
Web UI None ("account.X.anonymous_call.server_base_only" must not be left blank)
Phone UI None ("account.X.anonymous_call.server_base_only" must not be left blank)
Parameter account.X.anonymous_call_offcode
It configures the anonymous call off code.
The IP phone will send the code to deactivate anonymous call feature on server-side when you deactivate
it on the IP phone.
Description
Example:
account.1.anonymous_call_offcode = *73
Permitted
String within 32 characters
Values
Default Blank
Web UI None ("account.X.anonymous_call.server_base_only" must not be left blank)
Phone UI None ("account.X.anonymous_call.server_base_only" must not be left blank)
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2/CP920, X=1.

Call Number Filter

Call number filter feature allows IP phone to filter designated characters automatically when dialing.
Topic

Call Number Filter Configuration

Call Number Filter Configuration
The following table lists the parameter you can use to configure call number filter.
Parameter features.call_num_filter
It configures the characters the IP phone filters when dialing.
If the dialed number contains configured characters, the IP phone will automatically filter these char-
acters when dialing.
Description
Example:
features.call_num_filter = -
If you dial 3-61, the IP phone will filter the character - and then dial out 361.
286
[1]
<MAC>.cfg
<y0000000000xx>.cfg