Example: Setting A Line Key As Forward Key - Yealink SIP-T2 Series Administrator's Manual

linekey.1.label =Sell
After provisioning, you can easily press the Group Pickup key (line key 1) to pick up an incoming call to any phone
within a predefined group of phones.
Note
If the "linekey.X.value" is not assigned with a group pickup code, the Park key will invoke the group pickup code set by "fea-
tures.pickup.group_pickup_code" or "account.X.group_pickup_code".

Example: Setting a Line Key as Forward Key

When the phone receives an incoming call, you can press a Forward key to forward the incoming call to the preset
number.
When the phone is idle, the key behavior depends on the forward modes:
Forward
Modes
Destination number is configured:
Press the Forward key to activate/deactivate the always forward feature or switch the target among For-
ward keys.
Phone
Mode
Destination number is blank:
Press the Forward key to enter the forward setting screen or activate/deactivate the forward feature (if for-
ward has been configured from the Call Forward menu).
Custom
Press the Forward key to enter the forward setting screen.
Mode
The following example shows the configuration for Forward keys.
Scenario Conditions
features.fwd.allow = 1
features.fwd_mode = 0
forward.idle_access_always_fwd.enable = 0
Example
######Set a Forward key for Bill######
linekey.1.type = 2
linekey.1.line =1
linekey.1.value =4603
linekey.1.label =Bill
######Set a Forward key for Tom######
linekey.2.type = 2
linekey.2.line =1
linekey.2.value =4605
linekey.2.label =Tom
Key Behavior
Related Topic
Call Forward
Phone Customization
165