Yealink SIP-T2 Series Administrator's Manual page 317

Web UI Features->Forward&DND->Forward->Busy Forward->On/Off
Phone UI Menu->Features->Call Forward->Busy Forward->Busy Forward
Parameter forward.busy.target
It configures the destination number of the busy forward on a phone basis.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and the value of the parameter "fea-
tures.fwd_mode" is set to 0 (Phone) (except T19(P) E2/CP920 IP phones).
Permitted
String within 32 characters
Values
Default Blank
Web UI Features->Forward&DND->Forward->Busy Forward->Target
Phone UI Menu->Features->Call Forward->Busy Forward->Forward to
Parameter forward.busy.on_code
It configures the busy forward on code to activate the server-side busy forward feature.
The IP phone will send the busy forward on code and the pre-configured destination number (configured
by the parameter "forward.busy.target") to the server when you activate the busy forward feature on a
Description
phone basis.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and the value of the parameter "fea-
tures.fwd_mode" is set to 0 (Phone) (except T19(P) E2/CP920 IP phones).
Permitted
String within 32 characters
Values
Default Blank
Web UI Features->Forward&DND->Forward->Busy Forward->On Code
Phone UI Menu->Features->Call Forward->Busy Forward->On Code
Parameter forward.busy.off_code
It configures the busy forward off code to deactivate the server-side busy forward feature.
The IP phone will send the busy forward off code to the server when you deactivate the busy forward fea-
Description ture on a phone basis.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and the value of the parameter "fea-
tures.fwd_mode" is set to 0 (Phone) (except T19(P) E2/CP920 IP phones).
Permitted
String within 32 characters
Values
Default Blank
Web UI Features->Forward&DND->Forward->Busy Forward->Off Code
Phone UI Menu->Features->Call Forward->Busy Forward->Off Code
Parameter forward.no_answer.enable
It triggers the no answer forward feature to on or off on a phone basis.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and the value of the parameter "fea-
tures.fwd_mode" is set to 0 (Phone) (except T19(P) E2/CP920 IP phones). DND activated on the IP phone
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
311