Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Call States
Paging
ListeningPaging
BeTransferred
ConferenceManager
(only applicable to
CP920)
Softkey Layout File Customization
You can also configure the softkey layout using the softkey layout templates for different call states.
You can ask the distributor or Yealink FAE for softkey layout template. You can also obtain the softkey layout template
online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
Topics
Softkey Layout File Elements and Attributes
Customizing Softkey Layout File
Softkey Layout File Elements and Attributes
The following table lists the elements and attributes you need to understand in the softkey layout file. We recommend
you do not edit these elements and attributes.
Elements & Attributes
<Disable>
</Disable>
<Enable>
</Enable>
142
Enabled Soft Keys
Reject
End Call
Empty
Hold
Empty
End Call
Empty
Hold
Empty
End Call
Empty
Hold
Empty
End Call
Conf Far Mute
Conf Remove
FarHold
Back
Split All
Specify the disabled soft key list.
The phone screen will not display the disabled soft keys.
Specify the enabled soft key list.
The phone screen will display the enabled soft keys.
Disabled Soft Keys
Empty
Empty
Empty
Switch
NewCall
Empty
Split
RTP Status
Description