Yealink SIP-T2 Series Administrator's Manual page 82

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
Description It triggers the weekly feature to on or off.
0-Off
Permitted
Values
1-On, the IP phone will perform an auto provisioning process weekly.
Default 0
Web UI Settings->Auto Provision->Weekly
Parameter static.auto_provision.weekly_upgrade_interval
It configures the time interval (in weeks) for the IP phone to perform auto provisioning.
If it is set to 0, the IP phone will perform auto provisioning at the specific day(s) configured by the para-
meter "static.auto_provision.weekly.dayofweek" every week.
Description
If it is set to other values (for example, 3), the IP phone will perform auto provisioning at a random day
between the specific day(s) configured by the parameter "static.auto_provision.weekly.dayofweek" every
three weeks.
Note: It works only if "static.auto_provision.weekly.enable" is set to 1 (On).
Permitted
Integer from 0 to 12
Values
Default 0
Web UI Settings->Auto Provision->Weekly Upgrade Interval(0~12week)
Parameter static.auto_provision.inactivity_time_expire
It configures the delay time (in minutes) to perform auto provisioning when the IP phone is inactive at reg-
ular week.
If it is set to 0, the IP phone will perform auto provisioning at random between a starting time configured
by the parameter "static.auto_provision.weekly.begin_time" and an ending time configured by the para-
meter "static.auto_provision.weekly.end_time".
Description
If it is set to other values (for example, 60), the IP phone will perform auto provisioning only when the IP
phone has been inactivated for 60 minutes (1 hour) between the starting time and ending time.
Note: The IP phone may perform auto provisioning when you are using the IP phone during office hour.
It works only if "static.auto_provision.weekly.enable" is set to 1 (On).
Permitted
Integer from 0 to 120
Values
Default 0
Web UI Settings->Auto Provision->Inactivity Time Expire(0~120min)
Parameter static.auto_provision.weekly.dayofweek
It configures the days of the week for the IP phone to perform auto provisioning weekly.
Example:
static.auto_provision.weekly.dayofweek = 01
Description
If "static.auto_provision.weekly_upgrade_interval" is set to 0, it means the IP phone will perform auto pro-
visioning every Sunday and Monday.
If "static.auto_provision.weekly_upgrade_interval" is set to other value (for example, 3), it means the IP
phone will perform auto provisioning by randomly selecting a day from Sunday and Monday every three
76
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg