Dial Now Configuration - Yealink SIP-T2 Series Administrator's Manual

When you enter the number "1" and press the send key, the number "254245" will replace the entered
number "1".
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
String within 32 characters
Values
Default Blank
Web UI Settings->Dial Plan->Replace Rule->Replace
Parameter dialplan.replace.line_id.X
It configures the desired line to apply the replace rule. The digit 0 stands for all lines. If it is left blank, the
replace rule will apply to all lines on the IP phone.
Description
Note: Multiple line IDs are separated by commas. It works only if "dialplan.digitmap.enable" and "accoun-
t.X.dialplan.digitmap.enable" are set to 0 (Disabled). It is not applicable to T19(P) E2 IP phones.
0 to 16 (for T54S/T48S/T48G/T46S/T46G/T29G)
0 to 12 (for T52S/T42G/T42S)
0 to 6 (for T41P/T41S/T27G)
Permitted
Values
0 to 3 (for T40P/T40G/T23P/T23G)
0 to 2 (for T21(P) E2)
0, 1 (for CP920)
Default Blank
Web UI Settings->Dial Plan->Replace Rule->Account
Parameter dialplan_replace_rule.url
It configures the access URL of the replace rule template file.
For customizing replace rule template file, refer to
Description
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
URL within 511 characters
Values
Default Blank
[1]
X is from 1 to 100.

Dial Now Configuration

You can configure dial now rules either one by one or in batch using a dial now template.
The following table lists the parameters you can use to configure dial now.
Parameter dialplan.dialnow.rule.X
It configures the dial now rule (the string used to match the numbers entered by the user).
Description
When entered numbers match the predefined dial now rule, the IP phone will automatically dial out the
numbers without pressing the send key.
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Replace Rule File Customization.
<y0000000000xx>.cfg
Call Features
261