Auto Dst File Attributes; Customizing Auto Dst File - Yealink SIP-T2 Series Administrator's Manual

Administrator's Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the DST is set to Automatic, the IP
phone obtains the DST configuration from the AutoDST file.
You can customize the AutoDST file if required. The AutoDST file allows you to add or modify time zone and DST set-
tings for your area each year.
Topics

Auto DST File Attributes

Customizing Auto DST File

Auto DST File Attributes
The following table lists the description of each attribute in the template file:
Attributes Type
szTime required [+/-][X]:[Y], X=0~14, Y=0~59
String (if the content is more than one city, it is the best to keep
szZone required
their daylight saving time the same)
0/1
iType optional 0: DST by Date
1: DST by Week
Month/Day/Hour (for iType=0)
Month: 1~12
Day: 1~31
Hour: 0 (midnight)~23
szStart optional Month/Week of Month/Day of Week/Hour of Day (for iType=1)
Month: 1~12
Week of Month: 1~5 (the last week)
Day of Week: 1~7
Hour of Day: 0 (midnight)~23
szEnd optional Same as szStart
szOffset optional Integer from -300 to 300
Customizing Auto DST File
Before customizing, you need to obtain the AutoDST file. You can ask the distributor or Yealink FAE for DST template.
You can also obtain the DST template online:
port.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
1. Open the AutoDST file.
2. To add a new time zone, add <DST szTime="" szZone="" iType="" szStart="" szEnd="" szOffset=""/> between
<DSTData> and </DSTData>.
3. Specify the DST attribute values within double quotes.
For example:
Add a new time zone (+6 Paradise) with daylight saving time 30 minutes:
126
Values
http://sup-
Description
Time Zone
Time Zone name
DST time type
(This item is needed if you want
to configure DST.)
Starting time of the DST
Ending time of the DST
The offset time (in minutes) of
DST