Edk Configuration - Yealink SIP-T2 Series Administrator's Manual

Macro Action
$L<label>$
$LED<color and time>&L<label>$
(not applicable to T19(P) E2/CP920
IP phones)

EDK Configuration

To configure EDK list, EDK user input prompt, EDK soft keys and custom DSS keys, you have to enable EDK feature. By
default, the EDK feature is disabled.
Yealink IP phones can display the softkey ID or menu item ID by long pressing the Volume Up key. It is especially useful
for those users who need to view the softkey ID or menu item ID when configuring EDK macros.
The following graphic shows an example for displaying the softkey ID and menu item ID after accessing the menu of
T46S/G IP phones:
Example: $P2N5$ means invoking the EDK user input prompt 2 and inputting 5
characters at most.
Note: For more information on EDK user input prompt, refer to
Prompt Configuration.
This is the label for the entire operation. The value can be any string including
the null string (in this case, no label displays).
This label is used if no label is configured for a custom key DSS key or soft key,
otherwise this one is ignored. Make this the first entry in the action string.
Example: $LEDK2$1234$Tinvite$ defines calling out the number 1234 and using
the label "EDK2" for a Custom Key DSS key or soft key.
The status of the BLF/BLF list DSS key LED. Enable to specify the LED color for the
BLF/BLF list DSS key, and specify the duration time (in milliseconds) for the cor-
responding status of the BLF/BLF list DSS key. The valid value of the duration
time ranges from 100 to 60000ms.
Can be composed of multiple combinations of "color" and "time". The status will
be stuck in an infinite loop until triggered by other macros.
Supported colors include (must be lowercase):
r (red)
l
ri (red; red with incoming mark for T48S/G)
l
ro (red; red with outgoing mark for T48S/G)
l
g (green)
l
gi (green; green with incoming mark for T48S/G)
l
go (green; green with outgoing mark for T48S/G)
l
o (off)
l
&L<label> (Optional.): You have to put the "&L<label>" last in the command
flow.
Example: $LEDg1000o100r300&Lidle$ means an infinite loop for BLF/BLF list DSS
key LED status: glow green for 1000ms, be in the off state for 100ms and then
glow red for 300ms. At the same time, the label of the BLF/BLF list DSS key is
changed to "idle".
Note: The last "color" can be configured without "time", and it means per-
manently displaying the last color until triggered by other macros. This macro
can be only used for BLF/BLF list feature. For more information, refer to
List Key LED Status and Behavior
Description
Configuration.
Phone Customization
EDK User Input
BLF/BLF
177