Action Uri Configuration; Example: Capturing The Current Screen Of The Phone - Yealink SIP-T3 Administrator's Manual

[1]
X is the line key ID. For T57W/T48U/T48S/T48G, X=1-29; for T54W/T46U/T46S/T46G/T29G, X=1-27; for
T53W/T53/T53C/T43U/T27G, X=1-21; for T42U/T42G/T42S/T41P/T41S, X=1-15; for T33P/T33G, X=1-12; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for CP925/CP935W, X=1-30.

Action URI Configuration

The following table lists the parameters you can use to configure action URI.
Parameter features.action_uri.enable
Description It enables or disables the phone to receive the action URI requests.
Permitted 0-Disabled
1-Enabled
Values
Default
1
Parameter features.show_action_uri_option
It enables or disables the phone to pop up the Allow Remote Control prompt when receiving action
URI requests.
Description
Note: It works only if "features.action_uri.enable" is set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 1
Parameter features.action_uri_limit_ip
It configures server address from which the phone receives the action URI requests.
Multiple addresses are separated by commas. (for example, 10.1.4.3,10.1.4.23); Support asterisk wild-
Description card, each asterisk represents a field of the IP address (10.10.*.* represents 10.10.0.0 to
10.10.255.255).
Note: It works only if "features.action_uri.enable" is set to 1 (Enabled).
IP address
Permitted
Blank-the phone will reject any HTTP GET request.
Values
any-the phone will accept and handle HTTP GET requests from any IP address.
Default Blank
Web UI Features > Remote Control > Action URI Allow IP List

Example: Capturing the Current Screen of the Phone

You can capture the screen display of the IP phone using the action URI. The phones can handle an HTTP or
HTTPS GET request. The URI format is http(s)://<phoneIPAddress>/screencapture. The captured picture is saved as
a BMP or JPEG file.
You can also use the URI "http(s)://<phoneIPAddress>/screencapture/download" to capture the screen display first,
and then download the image (which is saved as a JPG file and named with the phone model and the capture time)
to the local system.
Note
: Yealink phones also support capturing the screen display using the old URI "http://<-
phoneIPAddress>/servlet?command=screenshot".
Before capturing the phone's current screen, ensure that the IP address of the computer is included in the trusted IP
address for Action URI on the phone. When you capture the screen display, the phone may prompt you to enter the
user name and password of the administrator if the web browser does not remember the user name and password
for web user interface login.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Advanced Features
532