Csta Control Configuration; Action Url; Predefined Events List - Yealink SIP-T3 Administrator's Manual

Topic

CSTA Control Configuration

CSTA Control Configuration
The following table lists the parameter you can use to configure CSTA control.
Parameter features.csta_control.enable
Description It enables or disables the CSTA feature.
Permitted
0-Disabled
Values 1-Enabled
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI Features > Remote Control > CSTA Control
[1]
If you change this parameter, the phone will reboot to make the change take effect.

Action URL

Action URL allows the phones to interact with web server applications by sending an HTTP or HTTPS GET request.
You can specify a URL that triggers a GET request when a specified event occurs. Action URL can only be
triggered by the predefined events (for example, Open DND). The valid URL format is: http(s)://<server-
IPAddress>/help.xml? .
An HTTP or HTTPS GET request may contain a variable name and a variable value, separated by "=". Each vari-
able value starts with $ in the query part of the URL. The valid URL format is: http(s)://<server-
IPAddress>/help.xml?variable name=$variable value . The variable name can be customized by users, while the
variable value is predefined. For example, a URL "http://192.168.1.10/help.xml?mac=$mac" is specified for the
event Mute, the $mac will be dynamically replaced with the MAC address of the IP phone when the IP phone mutes
a call.
Topics

Predefined Events List

Variable Values List
Action URL Configuration
Predefined Events List
The following table lists the predefined events for action URL.
Event
Setup Completed When the IP phone completes startup.
Registered When the IP phone successfully registers an account.
Unregistered When the IP phone logs out of the registered account.
Register Failed When the IP phone fails to register an account.
Off Hook When the IP phone is off hook.
On Hook When the IP phone is on hook.
[1]
<y0000000000xx>.cfg
Description
Advanced Features
512