Call Forward Synchronization For Server-Side Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Devices
Web UI Features > Forward&DND > Forward > AccountX > No Answer Forward > On Code
Phone UI Menu > Features > Call Forward > AccountX > No Answer Forward > On Code
Parameter account.X.timeout_fwd.off_code
It configures the no answer forward off code to deactivate the server-side no answer forward feature.
The phone will send the no answer forward off code to the server when you deactivate no answer for-
Description ward feature on the phone.
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 1
(Custom).
Permitted
String within 32 characters
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Web UI Features > Forward&DND > Forward > AccountX > No Answer Forward > Off Code
Phone UI Menu > Features > Call Forward > AccountX > No Answer Forward > Off Code
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42U/T42G/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2.

Call Forward Synchronization for Server-side Configuration

Call forward synchronization feature provides the capability to synchronize the status of the call forward features
between the IP phone and the server.
If the call forward is activated in phone mode, the forward status changing locally will be synchronized to all
registered accounts on the server; but if the forward status of the specific account is changed on the server, the for-
ward status locally will be changed.
The following table lists the parameters you can use to configure call forward synchronization for server-side.
Parameter features.feature_key_sync.enable
Description It enables or disables to synchronize the feature status between the IP phone and the server.
0-Disabled
Permitted
Values
1-Enabled, the phone sends a SUBSCRIBE message with event "as-feature-event" to the server.
Default 0
Parameter account.X.feature_key_sync.enable
It enables or disables to synchronize the feature status between the IP phone and the server for
account X.
Description
Note: The value configured by this parameter takes precedence over that configured by the parameter
"features.feature_key_sync.enable".
0-Disabled
Permitted
Values
1-Enabled, the phone to send a SUBSCRIBE message with event "as-feature-event" to the server.
454
[1]
<MAC>.cfg
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg