Call Number Filter; Call Number Filter Configuration; Ip Address Call; Ip Address Call Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Description It enables or disables to synchronize the anonymous call status between the IP phone and the server.
Permitted
0-Disabled
1-Enabled
Values
Default 0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Call Number Filter

Call number filter feature allows IP phone to filter designated characters automatically when dialing.
Topic

Call Number Filter Configuration

Call Number Filter Configuration
The following table lists the parameter you can use to configure call number filter.
Parameter features.call_num_filter
It configures the characters the phone filters when dialing.
If the dialed number contains configured characters, the phone will automatically filter these char-
acters when dialing.
Example:
Description
features.call_num_filter = -
If you dial 3-61, the phone will filter the character - and then dial out 361.
Note: If it is left blank, the phone will not automatically filter any characters when dialing.
Permitted
String within 99 characters
Values
Default , -()
Web UI
Features > General Information > Call Number Filter

IP Address Call

You can set the phone whether to receive or place an IP call. You can neither receive nor place an IP call if you dis-
able this feature.
Topic

IP Address Call Configuration

IP Address Call Configuration
The following table lists the parameter you can use to configure IP address call.
Parameter features.direct_ip_call_enable
It enables or disables to allow IP address call.
Description
Note: If you want to receive an IP address call, make sure "sip.trust_ctrl" is set to 0 (Disabled).
Permitted 0-Disabled
422
<y0000000000xx>.cfg
<y0000000000xx>.cfg