To Install The Remote Rack Stand - HP M2350A Service Manual

Mounting the Components
Installing Options
001, 002, 007,008
To Install the Remote Rack Stand
1. Determine whether you intend to keep the rack stand portable or to secure it to a tabletop
or other surface. Choose method A or B listed below:
a.
To keep the rack stand portable:
Attach the 5 rubber feet (HP 0403-0308) to the bottom of the rack stand as shown in
Figure 6-19.
5 RUBBER FEET
(0403-0308)
RACK STAND
Figure 6-19. Attaching the Rubber Feet
b. Tb
secure the rack stand to
a
surface:
Position the rack stand in the desired location and secure it to the surface using two
tapping screws (HP 0624-0743), as shown in figure Figure 6-20.
Figure 6-20. Securing the Rack Stand
6-20