HP M2350A Service Manual page 156

Mounting the Components
Installing Options 001, 002, 007,008
5. Replace the top cover and the screws removed in step 2 (Figure 6-8).
Figure 6-8. Replacing the Top Cover
6. Position the joiner bracket in the j@h rear ventilation slot on the display cover, as shown
in Figure 6-9, making sure the side of the bracket with the PEM washers faces the front of
the display. The holes in the tabs on the bottom of the joiner bracket will align with holes
on
the mounting bracket.
P,
Figure 6-9. Attaching the Joiner Bracket
-\ ,
6-14