Performing
Product Assurance
Replacing &per
in the Module Recorder
Note
To test if paper is loaded correctly, initiate a recording. If no printing appears,
paper is loaded backwards. Remove and reload.
'lb Remove Paper Loaded Backwards
1. Tear off paper, then open recorder door.
2. Pinch paper at shelf below roller, and pull paper off of roller (see illustration below).
3. Gently push excess paper back onto paper roll.
4. With paper rolled loosely, pinch several thicknesses of the loose paper with your fingers at
front of roll, and pull roll out from recorder. Tear off any damaged paper before attempting
to reload (see illustration below).
10.9