Removing and Replacing Components
Servicing the Computer Module
'lb Remove the Backplane
The procedure for removing the backplane is described in the following steps.
Step 1
Grip the uppermost edge and lift directly out of the computer module.
To Replace the Backplane
The procedure for replacing the backplane is described in the following steps.
Step 1
Stand to the rear of the computer module and hold the backplane by it uppermost
edge with the large space between the connectors on the left.
Step 2
Locate the backplane in the slot in the center of the computer module.
Step 3
Lower into the computer module.
Figure 12-18. Backplane
12.39