HP M2350A Service Manual page 167

Mounting the Components
Installing A-Option Mounts
To Install
the
Adapter Plate
If you require to mount the 14" Display Module or the Computer Module using a either a wall
or ceiling mount, an Adapter Plate is first attached to the Spanning Rails on the base of the
equipment. The procedure for attaching the adapter plate in each case is detailed in the
following steps.
Note
I
w
Spanning rails must be fitted to the 14" Display Module or Computer Module
before the following procedure can be attempted.
Step 1 Stand the Display Module on its back. The Computer Module should be standing
on its top cover.
Step 2
Align the four holes in the adapter plate with the holes on the spanning rails and
secure with the screws provided.
The equipment is now ready to be attached to either a wall or ceiling mount.
'lb Install the Wall Mount
Once the adapter plate has been attached to the equipment, wall mounting can be completed.
lb mount the 14" Display Module, or 14" Display Module and Computer Module combined on a
wall mount (M1180A # A01 to # A05), use the procedure detailed in the following steps.
If mounting a Computer Module and 14" Display Module combined, ensure
that the equipment is properly cam-locked together, using the procedures
described earlier in this chapter.
6-25