HP M2350A Service Manual page 236

Troubleshooting the System
Checking the Status Log
'Ib,ble 9-1. Error Code List (Device ID 16400 or 4OlOH)
Error Code(s) Possible Cause
. - 99
Hardware problem in given slot or
OOOlH - 0063H) cluster
Corrective Action
Replace the board in the given slot.
Replace other cards in cluster one by
one.
.oo - 199
Unexpected microprocessor interrupts Replace the board in the given slot.
0064H - OOC7H)
Replace other cards in cluster one by
one.
!Ol Software problem Make sure the current software release
OOC9H) is installed.
!02 Invalid contents of the Util CPU Reprogram EEPROM.
OOCAH) EEPROM
!03 - 239 MPB chip errors: Can be caused by Replace the master cards one by one.
OOCBH - OOEFH) hardware defects on the indicated CPC
as well as hardware defects on any
other MPB participant (Master Cards:
for example Util CPU, DPSC Ctrl, and
others) in the system.
!40 Software problem Make sure the current software release
OOFOH) is installed.
!41
Same as errors 203 - 239
OOFlH)
!42 Software problem Make sure the current software release
OOF2H) is installed.
!43 - 299 Same as errors 203 - 239
OOF3H - 012BH)
330
This is only detected by the CPC in slot Replace the other master cards one by
014AH) 22 and indicates that another MPB one.
participant (Master Card) does not
continue the boot up process as
required. This means there is
no error
in the indicated slot but is caused by
one of the other Master Cards.
335
This is only detected by the CPC in slot Replace the other master cards one by
614FH) 22 and indicates that another MPB one.
participant (Master Card) is sending
incorrect messages. There is no
error
in
the indicated slot but may be caused by
a software defect on the card that is
sending the incorrect messages.
340, 356, 370
These indicate communication problems Replace the master cards one by one.
:0154H, 0164H, between the CPC in slot 22 and another
1172H) MPB participant. Because of the type of
error, the slot code may
be incorrect.
9-12