Leaving Service Mode - HP M2350A Service Manual

Troubleshooting the System
Leaving Service Mode
Leaving Service Mode
Leave the Service Mode as follows:
Step 1
Step 2
Step 3
Press
CMonitor
setup). This displays the Instrument Configuration 'I&k Window.
Press :O~~~~t.~~~~~M~d~~". This displays the Operating Modes T&k Window with a
."...... : .: :-::.,. ,.,,,: . . -;.s. ::>.:.:.
prompt for a password.
Enter the password, a four-digit number, using the keys labeled $: to ;$-.
Step 4
Password = 4311
. ,...,.. ., . I.
.> 0 .,( (I . . :+. :
If the password is entered correctly, then the 8?&.& :XJpjlo.d~,; key is highlighted.
If the password is entered incorrectly the system remains in the Operating Mode
task window.
Step 5
Press ~~~~~~~~~~~~
/ / ,. /I.; .,:. ,,., ,_ ,:,. .A'. -
The Operating Mode task window displays ;g;-Y;g& and
/.. .i : :.. ..YP
~~~~.q~~:e in reverse video with the current operating mode highlighted.
Step 6
Step 7
Hishli.t the Monitor mode using the arrow keys or by pressing ~~~~~~~~~~~~~~~
," ,,,,....: :...:..., :.,..,.., . . . .'
Press (Confirm) to switch to the highlighted mode. The system now performs a
cold-start and the mode is switched from Service Mode to Monitoring Mode.
9-26