Table of Contents
Advertisement
Setting up the monitor
This section describes attaching the monitor stand or wall mount and the options for connecting your monitor
to a PC, notebook, gaming console, or similar device.
WARNING!
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the web at http://www.hp.com/ergo.
IMPORTANT:
panel can cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will
not recover to its normal condition.
IMPORTANT:
the control buttons, position the monitor facedown on a flat surface covered with protective sheet foam or a
nonabrasive cloth.
Attaching the monitor stand
Correctly attaching your monitor stand is critical for safe use. This section describes how to safely attach a
stand.
TIP:
Consider the placement of the monitor, because surrounding light and bright surfaces might cause
interfering reflections.
NOTE:
The procedures for attaching a monitor stand might be different on other models.
1.
Position the monitor head facedown on a flat surface covered by protective sheet made of foam or a
clean, dry cloth.
2.
Slide the top of the mounting plate on the stand into the connector on the back of the panel.
6
Chapter 1 Getting started
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
To prevent the screen from getting scratched, defaced, or broken and to prevent damage to
Advertisement
Table of Contents
