HP M2350A Service Manual page 237

Troubleshooting the System
Checking the Status Log
a
able 9-l. Error Code List (Device ID 16400 or 401OH) (continued)
Error Code(s)
Possible Cause Corrective Action
400 - 409
Out of memory
(0190H - 0199H)
Replace card in slot indicated in error
message.
Replace CPC if present in cluster.
410 - 419 Missing file errors Replace CPC in slot 22
(019AH - OlA3H)
Reprogram EEPROM on Utility CPU
board.
420 - 449 Utility CPU / EEPROM error Reprogram EEPROM on Utility CPU.
(OlA4H - OlClH)
Replace Utility CPU.
Replace CPC in slot 22.
500 - 699 Software problem Make sure correct version of software is
(OlF4H - 02BBH) installed.
700 - 799 Communication problem between two Replace card in given slot.
(OBBCH - 031FH) CPCs
Replace other master cards one by one.
800 - 899
Software problem Make sure correct version of software is
(032OH - 0383H)
installed.
900 - 914 Background check of memory detected Replace card in given slot.
(0384H - 0392H) an error
915 One of the CPCs has failed to send
a
test Replace card in given slot.
(0393H) message onto the next CPC. The Replace other master cards one by one.
reported slot code
may be incorrect.
916 - 919 Same as error range 900 - 914
(0394H - 0397H)
920 This indicates a missing frame interrupt Replace card in given slot.
(0398H) on the CPC in the reported slot. This Replace other master cards one by one.
could be caused by a missing electrical
connection (CPC, backplane, etc) or a
failure on the Util CPU. The reported
slot code
may be incorrect.
921 - 999
Same as error range 900 - 914
(0399H - 03E7H)
1000 - 1999 Error detected by CPC in slot 22 Consult the error code chart to
(03E8H - 07CFH) determine the location of the defective
card.
9-13