Setting Up The Monitor; Unpacking The Monitor; Installing The Base Stand - HP ENVY 27 User Manual

3

Setting Up the Monitor

Unpacking the Monitor

1. Make sure all contents are included. Store the packing box.
2. Turn off the computer and other attached devices.
3. Prepare a flat area to assemble the monitor.
NOTE: Use only the power cord and adapter provided with this monitor.

Installing the Base Stand

1. Place the monitor on a flat and even surface with the bottom side of the monitor extending
over the edge of the surface.
2. Slide the base to the stand. The latches automatically locks in place.
Figure 3-1
ENWW
Installing the Base Stand
Unpacking the Monitor 6